86-531-83857888
Luohe Village, Xinzhai Town, Zhangqiu, Jinan, Shandong, China
LY-2000 specification:
| Platform Length | 5600mm | |
| Platform Width | 2100mm | |
| Platform Height | 580mm | |
| Radius of Pulling | 360° | |
| Hydraulic Power | 70Mpa | |
| Power Pulling Capacity | 95KN | |
| Max lifting weight | 3500kg | |
| Total weight | 2300kg | |
Function
1.Outrigger tilt functions,the platform can be achieved during the ups and downs do not touch on the ground to reduce the equipment was damaged in the landing ground.
2.Tilt lift platform and ramps loads car easily.
3.The height of the platform is reasonable,make operation and maintenance convenience.Humanistic designs will make the clamp adjust upper and lower,front and back at very least bit.
4.The pulling tower rotate at 360°around the platform,make the ring platform working continuously.
5.Equipped with lots of pulling tools,the operator can choose any of them by themselves.
6.Two pulling tower can working at the same time,it’s proved the superiority of the partial pulling repair.
Picture show:
